The Signal Level View graph shows the Signal level and Noise level updated every second for the SSID under test.
The Signal level in dBm is measured every second for the SSID under test.
The Noise level in dBm is measured every second on the channel.
The x-axis displays time in HH:MM:SS format; the y-axis displays levels in dBm.
For the current measurement, the following information is displayed at the top of the graph:
SSID
under test,
Channel number
,
Signal Level
,
SNR
,
BSSID
under test,
Noise Level
.
Location Label
is included if it is enabled in the Setup menu (see
Level Tracking with Location Label
Last Rx frame
counter: The Signal level tracking measurement is based on the Signal level measured on frames received from
the SSID under test. If frames are being received on a continuous basis, this counter displays 0 sec ago, meaning that traffic is
currently received. If frames are not being received on a continuous basis, this counter displays the duration since the last frame
was received.
A dotted line indicates the Signal Level and Noise Level threshold as configured in the Setup menu (see
Note that the Signal level view keeps only a period of 15 minute measurements.
Signal Level View Table
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00
