VeEX MTTplus-900, User Manual

Page: 71 / 99

Hop:
Order of the routers on the route
TTL(ms):
Time to reach each router on the route
Address:
Address of each router on the route
Note : If there is no response from a particular hop, an asterisk will be displayed
.
Go back to top Go back to TOC
10.7 ARPWiz
ARPWiz verifies the status of each IP address in the user selected range by using ARP (Address Resolution Protocol).
Go back to top Go back to TOC
10.7.1 ARPWiz Setup
The following parameters can be setup for the ARPWiz test:
ARPWiz Setup
Profile:
Drop-down selections are
Default
,
Delete
,
Save
,
Save As...
Begin IP:
Set the start address for the desired IP range using the numeric keypad
End IP:
Set the end address for the desired IP range using the numeric keypad
Timeout(s):
Timeout duration for the ARP response
Once the parameters are configured, press
Start
to begin the test.
Go back to top Go back to TOC
10.7.2 ARPWiz Result
Pressing
Start
displays the
Result
tab and starts the ARPWiz test. The following results are displayed for the ARPWiz test:
ARPWiz Result
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00