VeEX MTTplus-900 User Manual Download Page 15

Page: 15 / 99

WiFi Icons

A. Antennas

: Displays the number of antennas in use: 3x3, 2x2, 1x1.

This is configurable from

Setup

(see

WiFi Setup

B. AP

: Displays the number of APs (SSIDs) discovered during the

Scan. From the Home menu, tap on this icon to open up the AP Scan

results table. Displays “---“ if no AP is detected or AP Scan test has not

been started.

C. Clients

: Displays the number of Clients discovered during the Client

Scan. From the Home menu, tap on this icon to open up the Client

Scan results table. Displays “---“ if no Client is detected or Client Scan

test has not been started.

D. Connection

: This icon displays the connection status to the AP.

From the Home menu, tap on this icon to open up the IP Connect

menu.

The Connection icon can take on the following statuses:

No AP connection

Successful AP association but no IP connection

AP association or IP connection failed

Successful AP association and IP connection

E. Scan:

Displays the status of the AP/Client Scan or Auto-Test. If the

Scan is stopped, this icon disappears.

Go back to top

Go back to TOC

4.3.2 Test Application Menu

4.3.2.1 WiFi Test Mode Home Menu

MTTplus-900 WiFi Test Home Menu

WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00

Summary of Contents for MTTplus-900




































































































Search results

Summary of Contents for MTTplus-900

Reviews:

Related manuals for MTTplus-900

Brands by name

Popular brands

VeEX MTTplus-900, User Manual

Search results

Summary of Contents for MTTplus-900

Reviews:

Related manuals for MTTplus-900

Brands by name

Popular brands