Vauxhall 2009 Antara Owner'S Manual Download

Page: 57 / 236

Seats, interior

The system's integral self-diagnosis fa cility

allows faults to be quickly remedied.

Imp or tant

Accessories not released for your v ehicle

type and other objects must not be
affixed or placed in the area in which the

airbags inflate, as they could cause
injury when the airbags are triggered.

Do not place any objects between the
airbag systems and the v ehicle

occupants; danger of injury.

Only use the hooks on the assist grips in

the roof frame to hang up light a rticles of
clothing or coat hangers. Do not place

any objects in the pock ets of the hanging
item s; risk of injury.

Do not stic k or place anything on the
steering wheel, instrument p anel, front

seat b ackrests in the vic inity of the
airbags and seat areas or c ov er them

with other m aterials.

The airb ag systems and b elt tensioner

control electronics can be found in the
centre console area . In order to avoid

malfunctions, d o not store magnetic
objec ts in this area .

Use only a dry cloth or interior c leaner to
clean the steering wheel, instrument

panel, front seat backrests, roof fra me
and seat a rea of the front seats. Do not

use any ag gressive cleaning agents.

Only protective covers which are

approved for your vehicle with side
airbags

m ay be fitted on the front

seats. When fitting the protective covers,
make sure that the a irb ag units on the

outboard sides of the front seat
backrests are not covered.

The airbag systems are triggered
ind epend ently of each other, depending

on the severity of the accident a nd the
type of im pact. The side airbag system

and the c urtain airbag system are
trig gered together.

During off-road driving especially,
airbags can also inflate in moderate to

severe non-collision situations such as
when slamming the und ercarriage or

other solid components of the vehic le in
a dip in the driving surfac e.

Each airbag can be triggered only once.
Once triggered, an airb ag must be

replaced imm ediately by a workshop.

Warning

Have the cause of the fault remedied by
a workshop.

Warning

Disreg ard of these instructions may lead

to injuries or end ang er life.

Summary of Contents for 2009 Antara













































































































































































































































Search results

Summary of Contents for 2009 Antara

Reviews:

Related manuals for 2009 Antara

Brands by name

Popular brands

Vauxhall 2009 Antara, Owner'S Manual

Search results

Summary of Contents for 2009 Antara

Reviews:

Related manuals for 2009 Antara

Brands by name

Popular brands