Vauxhall 2009 Antara Owner'S Manual Download Page 25

Page: 25 / 236

Locks, doors, windows

Central locking system

For front doors, rear doors, tailga te and
tank flap.

To lock:

Press button

on rem ote control

- or -
With the doors closed, press central locking

switch

in driver’s door.

The c entral locking system can be

activated with the windows op en.
Always ensure that the doors, bonnet,

tailgate, sunroof

a nd windows are

properly closed and that there a re no

passengers left in the vehic le before
locking with the remote control.

To unloc k:

Press b utton

on remote control

- or -
Press centra l locking switch

in driver’s

door.
If no door is op ened within a pprox.

30 seconds after the vehicle has been
unlocked v ia the remote control, the vehicle

is relocked autom atically and Vauxhall
alarm

is reactivated.

When button

is pressed, the instrument

panel illuminates for approx. 30 seconds or

until starter switch is turned to the
ACC position.

Centra l locking switch

Use the central lock ing switch to lock or
unlock the doors, tailga te and ta nk flap

from insid e the vehicle.
Press the right part of the switch to lock or

the left part of the switch to unlock.

Warning

For safety reasons, the vehicle cannot be
locked or unlock ed via the remote control

(and the anti-theft system

will not b e

activa ted) if the key is in the starter

switch.

Summary of Contents for 2009 Antara













































































































































































































































Search results

Summary of Contents for 2009 Antara

Reviews:

Related manuals for 2009 Antara

Brands by name

Popular brands

Vauxhall 2009 Antara, Owner'S Manual

Search results

Summary of Contents for 2009 Antara

Reviews:

Related manuals for 2009 Antara

Brands by name

Popular brands