Vauxhall 2009 Antara Owner'S Manual Download

Page: 127 / 236

Driving and operation

123

Maintena nc e

Certain maintenance operations, e.g.

changes of engine oil, oil filter, air clea ner
element and brake pads, are required

more frequently for severe operating
conditions, e.g. driving on unsurfaced

roads, during thick dust or mud
accumulation, etc.
If the vehicle is driven off-road to a great
extent, the chassis will need regula r

inspection.
Your Vauxhall Authorised Repairer will

inform you which additional Service is
req uired between the normal Service

intervals, after considera tion of the sp ecific
opera ting conditions of your vehicle.
Further information - see page 202.

Service chec ks after wa ding

After wading, c heck for the ingress of water

into the following :

Bra ke fluid reservoir,

Air c leaner elem ent,

Engine,

Transmission,

Axles,

Interior of vehicle.

Renew any lubricating oil or hydraulic fluid
that has a milky appearance, indicating

contamination with water.

All Wheel Drive sum mary

Check fuel and tyres, water and oil levels
before venturing off-roa d.

Survey on foot before driving off-road,
especially w hen traversing hillsides,

wading, driving in deep snow and ov er
ridges.

Select the correct gear for the conditions.

Use the engine’s power of ac celera tion

and d eceleration with the correct gea r,
to control the vehicle.

Keep a firm g rip on the outer rim of the
steering wheel - keep your thumbs away

from the spokes.

Drive carefully and be prepared for

emergencies.

Drive slower under crossw ind cond itions.

Approach obstacles and conditions
off-road at the correct angles a nd with

sufficient momentum to negotia te the
obstacle, b ut do not put undue strain on

the vehicle.

Use caution - if you are not sure, do not

do it.

Don’t

Do not venture off-road unless you are

certain that the cond itions are capable
of being negotia ted safely by you and

your vehicle.

Do not ta ke unnec essary risks.

Do not use the brak es excessiv ely, to
maintain steering control.

Do not c hange gear on diffic ult terrain -
depressing the clutch m ay ca use the

vehicle to stop beca use of drag on the
wheels - or accelerate backwards or

forwa rd s w hen on a hill.

Do not rid e or slip the clutch.

Do not spin the wheels if stuck in mud,
sand or snow - they will only dig in

deeper.

Do not drive at an excessive speed,

espec ia lly into corners. Your All Wheel
Driv e v ehicle ha s a higher centre of

gravity than conventional v ehicles.
Sudden changes of direction can lead to

loss of control.

Summary of Contents for 2009 Antara













































































































































































































































Search results

Summary of Contents for 2009 Antara

Reviews:

Related manuals for 2009 Antara

Brands by name

Popular brands

Vauxhall 2009 Antara, Owner'S Manual

Search results

Summary of Contents for 2009 Antara

Reviews:

Related manuals for 2009 Antara

Brands by name

Popular brands