Valco baby MCP-25/MS, Manual

Page: 132 / 179

Section 14 — Job-Management Menu
MCP-25/MS
Valco Cincinnati 14-8
Preparing a New
Job In Memory
This function is used when you want to prepare a
new job while the current job is operating (for
example, during product changeover).
To prepare a new job in memory, follow these steps:
1. Press F3 (Prepare). The “Enter a job name:”
message displays.
2. Enter a name for the new job.
Note! The job name can consist of any
combination of alphanumeric charac-
ters. You use the scroll buttons to enter
letters and the “-” sign and the numeric
keypad to enter numbers. Pressing the
right arrow key advances you to the
next character place; pressing the left
arrow key takes you back to the
previous character.
3. Press F2 (Yes) to answer yes to the “Name
OK?” message. The glue-pattern-edit menu
displays (Figure 14-19).
4. Enter the values for the glue pattern (see
Section 9—Glue Pattern Edit Menu ).
5. Press F2 (Press.). The glue-pressure-edit
menu displays (Figure 14-20).
Note! When the “Prepare” function is used,
the glue-pressure-edit menu provides
the following default values:
Metric (V = meters per minute):
V = 0020 0100 0000 0000
P (%) = 010 035 000 000
Imperial (V = feet per minute):
V = 0080 0400 0000 0000
P (%) = 010 035 000 000
6. Enter the values for the glue-pressure curve
(see Section 11—Glue-Pressure-Edit Menu ).
7. Press F1 (END). The job-management menu
displays.
F3
Figure 14-18. Job-Management Menu
Figure 14-19. Glue-Pattern-Edit Menu
Figure 14-20. Glue-Pressure-Edit Menu
Avai lable : 98 Jobs / 16.02.2001 01:57
Curr ent Job: 1 16.01.01
Testjob1 05.10.01
Testjob2 15.12.01
New Change Prepare Rename <<<
F1 F2 F3
F4 F5
End Press. Forward Back
1 1
00000
00000
00000
00000
00000
Job: 1 [mm]
Loc kout = 0 0000 0
R e p e a t l e n g t h = 0 1
>>>
F1 F2 F3 F4 F5
End Pattern Forward Back
Job: 1 [m/min]
<<<
0080 0400 0000 0000 0000
+ / -
1
m i n.
max.
010 035 000 000 000
V
P [%]
F1
F2 F3 F4 F5