Valco baby MCP-25/MS, Manual

Page: 88 / 179

Section 9 — Glue-Pattern-Edit Menu (Standard) MCP-25/MS
Valco Cincinnati 9-6 MC051 (July 2002)
Entering/Editing
a Glue Pattern
To enter or edit a glue pattern in standard mode
(0) , stitch mode (2) , or jogging mode (3) , follow
these steps:
1. Using the arrow keys, move the cursor to
the field you want to change.
2. Using the either the numeric keypad or the
scroll buttons (+10, +1, -1, -10), enter a
new value for the field.
Note ! Newly entered or changed values
will be immediately accepted by the
control. Therefore, complete values
must be entered quickly.
Note! The cursor automatically moves to
the next display field when the
ENTER button is pressed. Arrow
keys can also be used to move to the
desired field.
Continuous-gluing mode (1):
In continuous-gluing mode (see Figure 9-7), the
operation of the valve depends on the Vmin
minimum-speed setting. The valve turns on when
the parent machine operates above the minimum-
speed setting, and turns off when the parent
machine operates below the minimum-speed
setting. Therefore, the parameters cannot be
changed in the glue-pattern-edit menu. You can
press F5 (Mode) to display the mode-selection
screen, where you can select a different mode.
Figure 9-6. Glue-Pattern-Edit Menu with
Standard, Stitch, or Jogging Mode Selected
(Standard Mode Shown)
Repeat factor = 01
1 1
00000
00000
00000
00000
00000
Job: 1 [mm]
Lockout = 0 00000
MODE 0
Valve oper ation
depends on Vmi n !!
Forward Back
1
0 0
00000
[mm]
00
00000
MODE 1
Figure 9-7. Glue-Pattern-Edit Menu with
Continous-Gluing Mode Selected
F1 F2 F3
F4 F5
F1 F2 F3
F4 F5
Mode
Delete Copy
Chan. Chan.
+
^ -
^