Valco baby MCP-25/MS, Manual

Page: 171 / 179

Appendix C — Glue-Pressure Software (Older Generation Controls) MCP-25/MS
Valco Cincinnati C-5
Entering the Glue-Pressure
Data with the Learn Function
The “Learn” function allows you to import the current
parent-machine speed and corresponding glue-pressure
values into the glue-pressure table. The learn function is
available for the current job or when “NEW” is selected
from the job-management menu. (The learn function is
not available when using “CHANGE” or “PREPARE”
in the job-management menu.)
To enter the glue-pressure data with the learn function,
follow these steps:
1. While the parent machine is operating at any
production speed, make sure the glue volume
being applied is correct.
2. Press F5 (Learn) to import the current parent-
machine speed and corresponding glue-pressure
values into the glue-pressure-edit table. The cursor
is automatically placed in the field that was
imported.
Note! The control will sort the other values for
speed and pressure in numeric order.
3. Using either the numeric keypad or the plus/minus
scroll buttons, change the pressure value as
necessary.
To import other points of the pressure curve, follow these
steps:
1. Change the speed of the parent machine.
2. Press F5 (Learn).
Note! You can import up to five values for parent-
machine speed and corresponding glue
pressure. The values are sorted in numeric
order and are immediately valid.
Job: 1 [m/min]
0000 0020 0300 0000 000 0
+ / -
1
m i n. ma x.
005 010 090 000 000
V
P [%]
F1 F2 F3
F4 F5
Step 2 — Glue-Pressure-Edit Menu
F5
Delete
Copy Chan. Chan. +^
Learn
^ -