Valco baby MCP-25/MS Manual Download Page 110

Page: 110 / 179

Valco Cincinnati

12-1

MC051 (July 2002)

Introduction

To access the inspection menu, follow this step:

1. Press the inspection-menu icon button (Figure 12-1). Either the

glue-volume

bar graph or the

glue-pattern

bar graph displays

(Figures 12-2 and 12-4). If glue volume is turned on, the glue-

volume bar graph displays. If glue volume is not turned on, the

glue-pattern bar graph displays.

Notes!

If glue volume is turned on, F3 toggles between the glue-

volume bar graph and the glue-pattern bar graph. The glue-

volume bar graph screen will show a bar graph for each

active glue valve (Figures 12-2 and 12-3). Up to four valves

can be displayed.

Config.

Jam

Pattern

Section 12—Inspection Menu

Figure 12-1. Inspection-Menu

Icon Button

1 Valve number

This number indicates the valve on which the

display is based.

2 Bar graph

The bar graph shows the actual glue volume

compared to 100%.

3 100% base line

This line indicates the learned value.

4 F1

Press F1 (Config.) to display the inspection

screen.

5 F2

Press F2 (Jam) to display the jam-preventer setup

screen.

6 F3

Press F3 to toggle between the glue-volume bar

graph and the glue-pattern bar graph.

Figure 12-2. Glue-Volume Bar Graph for System with One Valve

2. To display the inspection screen, press F1 (Config.). The inspection screen displays (Figure 12-5).

Glue-Volume Bar Graph

Summary of Contents for MCP-25/MS




















































































































































































Search results

Summary of Contents for MCP-25/MS

Reviews:

Related manuals for MCP-25/MS

Brands by name

Popular brands

Valco baby MCP-25/MS, Manual

Search results

Summary of Contents for MCP-25/MS

Reviews:

Related manuals for MCP-25/MS

Brands by name

Popular brands