Section 14
—
Job-Management Menu
MCP-25/MS
Valco Cincinnati
14-10
Backup and Restore Functions
(only available w/new CPU 151xx515)
The MCP-25/MS control with new CPU (151xx515) is equipped with 8Mbytes of Flash memory. In addition to the
ability to store a program, flash memory provides the capability to back up (and restore) job storage (up to 100 jobs)
and all setup parameters. This capability offers the following advantages:
• All jobs and setup parameters can be recovered, even when the backup battery has been discharged (70
days w/o power).
• After a software update, all settings can be restored immediately.
Note!
We strongly recommend that customers perform frequent backups (weekly) to ensure accurate and current
job data. We also recommend that backups be performed before a control is shipped, after a control is
installed and adjusted, and whenever significant changes are made to setup parameters.
Back up to
Flash memory
F1
To initiate a backup via the job-management menu,
complete the following steps:
1. Press F5 (>>>) until the function ‘Backup’
appears above function key F1 in screen 3 of
the job-management menu (see Figure 14-23).
2. Press F1 to start the Backup function. If a
backup is already stored in Flash memory, a
message will display (see Figure 14-24).
3. Make sure that the old backup can be over-
written and press F2 to confirm. Press F4 if
you do not wish to overwrite the existing
backup.
Figure 14-23. Job-Management Menu, screen 3
ATTENTION: Stop the machine before using the Backup Function.
All valves will be switched off during the procedure.
The previous backup cannot be restored after it has been overwritten.
Testjob 03/27/02 Box1 03/25/02
Box2
03/28/02
Box3 03/25/02
Backup
<<<
F1
F2
F3
F4
F5
Avai l abl e : 9 8 Jobs / 03/28/02
12:57
Cur rent Job: * TestJob
03/27/02
Avai la ! ! ! ! ! ATTENTION ! ! ! ! ! 12:57
Cur re
Do you want to /27/02
Yes
No
<<<
Testjo overwrite the /25/02
Box2
existing backup from:
Box3 03/24/02 01:13:05 PM
F1
F2
F3
F4
F5
Figure 14-24.
Summary of Contents for MCP-25/MS
