4
Remove the cable entry plate.
M5x8
FR8
M5x12
M5x10
FR9
5
Find the DC terminals and Brake resistor terminals
on top of the AC drive.
B- B+
R+ R-
6
Cut the grommets open to move the cables through
them.
a
)
Do not cut the grommet openings wider than
what is necessary for the cables that you use.
b
)
If the grommets fold in when you put the cable,
pull the cable back to make the grommets
straight.
NOTE!
Use a cable gland as an alternative to the
grommet in types where this is necessary.
POWER CABLING
VACON · 67
24-HOUR S358 (0)201 212 575 · EMAIL: [email protected]
5
