Vacon nxs, User Manual

Page: 105 / 165

2 To go to the edit mode, push the Menu button Right.
'Change Enabled' starts to blink. READY
I/O term
Multimon. items
ChangeEnable
3 Use Browser buttons Up and Down to select
Change Enabled or Change Disabled. READY
I/O term
Multimon. items
ChangeDisable
4 Accept the selection with the Enter button.
7.9.6 KEYPAD SETTINGS
In the Keypad settings submenu in the System menu you can make changes to your control
panel.
1 In the System menu (M6), find the Keypad
settings submenu (S6.6) with the Browser
buttons. In the submenu, there are 5 pages
(P#) that control the panel operation:
•
Default page (P6.6.1)
•
Default page in the operating menu
(P6.6.2)
•
Timeout time (P6.6.3)
•
Contrast adjustment (P6.6.4)
•
Backlight time (P6.6.5)
READY
I/O term
Keypad settings
P1  P5
7.9.6.1 Default page (P6.6.1)
With Default page, you can set the location (page) to which the display automatically moves
after the Timeout time (see below) or after you set the panel on. If the Default Page value is
0, the function is not activated. When the Default page is not used, the control panel shows
the page that was last showed on the display.
CONTROL PANEL VACON · 105
24-HOUR S358 (0)201 212 575 · EMAIL: VACON@VACON.COM
7