1
In the System menu (M6), find the Application
selection page (S6.2) with the Browser buttons.
READY
STOP
I/O term
Application
Standard
2
Push the Menu button Right.
3
To go to the edit mode, push the Menu button Right.
The name of the application starts to blink.
READY
STOP
I/O term
Application
Standard
4
Scroll through the applications with the Browser
buttons and select a different application.
5
To accept the selection, push the Enter button. The
AC drive starts again and goes through the setup.
READY
STOP
I/O term
Application
Multi-step
6
When the display shows the question 'Copy
parameters?', you have 2 options:
•
To upload the parameters of the new
application to the keypad, select Yes with the
Browser buttons.
•
To keep the parameters of the application that
was last used in the keypad, select No with the
Browser buttons.
For more information on the Application Package, see Vacon NX Application Manual.
7.9.3
COPY PARAMETERS (S6.3)
Use this function to copy parameters from one AC drive to a different AC drive or to save
parameter sets in the internal memory of the AC drive.
You must stop the AC drive before you can copy or download parameters.
SAVING PARAMETER SETS (PARAMETER SETS S6.3.1)
You can get the factory default values back or save 1-2 customised parameter sets. A
parameter set includes all parameters of the application.
VACON · 96
CONTROL PANEL
7
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
