Vacon 500X, User Manual

Page: 96 / 124

Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
95
z
vacon vacon 500x parameters
7
914 Vmet Status
915 Imet Status
Default: Read-Only
Range: 0.00-100.00%
Level 2 (SIO)
Parameter 914 provides the output percentage applied to the Vmet terminal; parameter 915 provides the
output percentage applied to the Imet terminal.
916 Infrared Baud Default: 9600
Range: n/a
Level 2 (SIO)
This parameter defines the baud rate of the IRDA port.
The following data values may be assigned to this parameter:
Parameter Value
9600
19200
38400
57600
917 Fbus Port Config Default: 485 w/ctl
Range: n/a
Level 2 (SIO)
This parameter is used for configuring the Fieldbus port.
The following data values may be assigned to this parameter:
Parameter Value
0 = Disabled; no Fieldbus communications allowed.
1 = 485 w/ctl: The RS485 port will be re-mapped to Fieldbus Communications.
2 = IR w/ctl: The Infrared port will be re-mapped to Fieldbus Communications; serial link control can only
come through Fieldbus communications.
3 = IR no ctl: The Infrared port will be re-mapped to Fieldbus Communications, but no control will be allowed
through Fieldbus. The RS-485 port on the drive will still have SIO control rights.
920 SIO Vmet Level Default: 100.00%
Range: 0.00-100.00%
Level 2 (SIO)
This parameter allows the Vmet Analog Output level to be programmed to a certain voltage, if Vmet Config
is set for SIO Config.
921 SIO Imet Level Default: 100.00%
Range: 0.00-100.00%
Level 2 (SIO)
This parameter allows the Imet Analog Output level to be programmed to a certain voltage, if Imet Config
is set for SIO Config.
926 Status Word 2 Default: Read-only
Range: n/a
Level 2 (SIO)
This parameter provides status information for the drive operation to a serial link user.
The following data values may be assigned to this parameter:
Bit # / Value
0 = Reminder 1 Time Expired
1 = Reminder 2 Time Expired
2 = Reminder 3 Time Expired