Vacon 500X, User Manual

Page: 5 / 124

24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
summary of vacon 500x parameters
vacon
z
4
523 Id Percent 0 - 200% Read-only 78
524 Iq Percent 0 - 200% Read-only 78
525 Power Fail Config text string CTS No Msg 78
526 UV Ride-Thru En text string w/ LVT 78
600 Current Lim Sel text string 0 79
601 Cur Lim Mtr Fwd 5%-150% 120% 79
602 Cur Lim Mtr Rev 5%-150% 120% 79
603 Cur Lim Reg Fwd 5%-150% 80% 79
604 Cur Lim Reg Rev 5%-150% 80% 79
605 Cur Lim Freq 0.0 - 400.0 Hz 3.0 Hz 79
606 Ramp Time CL 0.1-3200.0 sec 1.0 sec 79
607
Cur Limit
Minimum
0 - 50% 10% 79
608 Restart Number text string 0 80
609 Restart Delay 0-60 sec 60 sec 80
610 Timed OL Select text string 0 (Std Ind 60s) 80
613 Max Regen Ramp 100 - 1000% 300% 81
700 Vmet Config text string Freq Out 81
701 Vmet Span 0.0-200.0% 100.0% 81
702 Imet Config text string Drive Load 82
703 Imet Span 0.0-200.0% 100.0% 82
704 Imet Offset 0.0-90.0-% 0.0% 82
705 Relay 1 Select text string 1 (Drv Fault) 83
706 Relay 2 Select text string 2 (Drive Run) 83
707 DO1 Select text string 0 (Drv Ready) 83
708 DO2 Select text string 6 (At Speed) 83
720 Active Logic text string 1 (Active High) 83
721 DI1 Configure text string 0 (Preset 1) 84
722 DI2 Configure text string 1 (Preset 2) 84
723 DI3 Configure text string 2 (Preset 3) 84
724 DI4 Configure text string 6 (Alt Ramp) 84
725 DI5 Configure text string 7 (Fault Reset) 84
726 MOL Polarity text string 1 (NO Operate) 85
727 MOL Configure text string 21 (MOL) 84
740 Thres 1 Select text string 9 (Load High) 85
741 Thres 1 High -300.00 to 300.00% 100.00% 85
742 Thres 1 Low -300.00 to 300.00% 0.00% 85
743 Thres 2 Select text string
15 (Current
High)
85
744 Thres 2 High -300.00 to 300.00% 100.00% 86
745 Thres 2 Low -300.00 to 300.00% 0.00% 86
746 Timer 1 Type text string 0 (On Delay) 86
747 Timer 1 Signal text string 1 (Drv Fault) 86
748 Timer 1 Time 0.0 - 320.0 sec 1.0 sec 86
749 Timer 2 Type text string 0 (On Delay) 86
No. Parameter Name Options Default
User
Setting See Page