UTStarcom UT618, User Manual

Page: 86 / 191

UT618 User Manual Setting Up Your Phone 3-31
3.25 Your Own Number
•
You can use this feature to set the phone number in the phone and press
to display “Own number” to check it.
•
The number can be the actual phone number or a virtual number (e.g. for
security reason).
3.25.1 Setting Own Number
1. Press , to display “Change Own Number” screen.
2. Enter the phone password.
•
The password you entered will be displayed as “****”.
•
If the password is correct, “New Password” screen is displayed. If the
password is incorrect, “Invalid Password” will be displayed and it will
go back to the standby mode screen.
3. Enter the phone number.
4. Press , to display “Registered” , which means the own number, has been
saved.
) ) ) ) Note:
•
If the phone has set an own number; your own number will be displayed in
Step 2 after you enter the password. Please enter the new number in Step 3.
3.25.2 Displaying Own Number
1. Press to display “Own Number” . If you have not set “Own
Number”, it will be displayed as “---“.
•
The displayed number is the number you saved in “Change Own
Number”.
•
You can check your own number even you are talking on the phone. When
the checking is completed and the result is displayed, the screen will go
back to the in use display after 60 seconds.
3.26 Toll Lock
•
You can set long distance call lock. When the toll lock is turned on, long
distance calls cannot be dialed out.
•
The default setting for Toll Lock is “OFF”.
•
Toll lock cannot lock long distance call made by IP, or phone cards.