UTStarcom UT618, User Manual

Page: 47 / 191

2-10 Learning to use your phone UT618 User Manual
•
When a call is received, the phone will ring, and the Sub LCD
will flash (if the phone flip is already open, the Sub LCD will not
flash.)
•
To stop ringing / vibration, press . If a call is received
when the flip is open, ringing / vibrator can be stopped by
closing the flip. The call is not disconnected.
•
The phone will also show caller’s number if the caller ID service
is subscribed.
•
If the number has been entered in the phone book, then the
caller’s name will also be displayed. If the number is in the
secret phone book, only the phone number will be shown.
•
Pressing will reject the call.
2. Press to answer the call. "In Use" will be displayed and if
"Talking Time" function is activated, it will also show the length of the
call. While in conversation the navigation key can be used to accomplish
the following functions
: adjust Earpiece volume
: Number memo
: Search phone book
3. Press to terminate the call. When the call is terminated "End Call
" will be displayed.
) ) ) ) Note :
•
When the flip is opened, the ringer volume of incoming call will
gradually increase to the set level. But if the incoming call ringer is set
to off or Manner mode is set to on and its volume is turned off, incoming
call volume is turned off.
•
Upto 15 digits can be displayed for an incoming call.
•
If you open the flip when there is an incoming call, the Sub LCD will
stop flashing and the backlight will be turned on. If you close the flip,
the Sub LCD will flash again but ringing/vibration will stop.
2.7 Incoming Call Record
•
Record the phone number, date, and time of incoming calls and short
messages.