UTStarcom UT618, User Manual

Page: 58 / 191

UT618 User Manual Setting Up Your Phone 3-3
3. Press to select vibrator type press
•
When you set vibrator type, the phone will vibrate with the set style for
reference
4. Press , to display “Set” which means the vibrator has been turned on.
)
) )
) Note:
•
When “call” vibrator is set to “ON”, ‘ ” icon is displayed on the main
display.
•
When SMS/Mail vibrator is set to on, the phone vibrates three times
when you receive a new message or email.
3.4 Setting Earphone Pickup
•
If this feature is activated, the phone will answer incoming calls
automatically if the earphone is plugged in.
•
The default setting of earphone pickup is “OFF”.
1. Press , to display “Call/ Vibrator” menu.
2. Press to toggle “Earphone pickup” between “OFF” and “ON” .
•
When there is an incoming call, the phone will answer the call
automatically after 5 seconds of ringing. The ring can be heard from
the earphone.
)
) )
) Note:
•
To cancel “Earphone pickup” , please repeat steps 1 and 2. The icon will
switch from “ON” to “OFF”, which means the earphone pickup is
cancelled.
•
This feature is only available under “Public” mode.
•
This does not have effect on the short messages and emails, and behaves the
same way as it would without the earphone.
3.5 Melody Setting
•
This feature allows you to change the melody and the volume for call,
alarm, schedules and SMS/Mail.
•
There are three ringing categories:
1.
Harmony (10 built-in four chord melodies)
2.
Monody (6 built-in melodies and 10 composed and downloaded melodies)
3.
Analog (6 composed melodies and 1 voice memo)