UTStarcom UT618, User Manual

Page: 45 / 191

2-8 Learning to use your phone UT618 User Manual
•
Press to switch between Dialed Record and Detailed Record.
•
Icon description: phone call, short message,
auto received email.
•
When email is set to auto receive, auto received email will be
recorded but cannot be redialed.
•
If a dialed number is a number in the secret phone book, only the
phone number will be shown.
•
Press to show the sub menu
1. Dial: Will dial the number
2. New SMS: Will create a new message
3. Check SMS: Read the message but cannot be edited. If a non-
message number is selected, this menu item will be grayed out
and cannot be selected.
4. Each phone record can hold three phone numbers. If a dialed
number's record in the phone book has additional numbers, those
numbers can also been shown. Using the numeric key to select it
will automatically dial the number. If the dialed number is not in
the phone book or the record in the phone book contains no
additional phone numbers, it will display
"No number" (grayed
out and cannot be selected).
•
To call a number that was used for message, press , and the
sub menu will be displayed. Press to dial.
2.5.2 Composing A New Message
1. Select a number from the Dialed Record to create a new message
2. Press to show the sub menu
3. Press to select "New SMS" to enter "SMS" input screen.
4. Follow operations after Step 2 in "Composing a New Message" in
Chapter 6.
2.5.3 Reading A Message
1. Select the message to be viewed from the Dialed Record
2. Press to show the sub menu