UTStarcom UT618, User Manual

Page: 177 / 191

10-4 Group UT618 User Manual
3. Press to terminate the call; “End Call” will be displayed.
10.4 Transferring a Phone Book
•
To use “Transfer” feature, you need to set a group and then switch to
“Transfer” standby mode.
•
Send and receive data includes the following information:
Parameter Details
Name 16 characters or 32 alphanumeric characters
Phone number 32 numeric characters
Phone Type
Regular phone, PHS, GSM, pager, fax, 3G, office, none
Email address 64 English characters
Type
0~8 (except for secret phone number)
10.4.1 Transferring select Phone Book data
•
Select the phone book you want to transfer and follow the steps below:
1. Press , to display the “Transfer” screen.
•
If there is no phone book data or if the phone is not under “Transfer” mode, all
the items are grayed out and cannot be selected.
2. Press to select “PhoneB.Appo”; the phone book menu is displayed.
•
“New”, “Favorite Call”, “Secret”, “Editing Data” and “Delete All” are
grayed out and cannot be selected.
3. Press to enter “Name Search” press to display the data.
4. Press to select the data you want to transfer press to confirm it. The
selected data will have a “ √ ” in the frame.
•
To select several data, please press and repeat this step.
•
To cancel the selection, please press again.
5. Press , “PhoneBook Tras.” screen is displayed press to select the group
number you and the receiver belong to.
6. Press , to display “Transceiver No.” input screen.
7. Enter the transceiver number press , to display “Transferring” . The phone
begins to transfer the selected phone book data.
•
The number of selected data and the number of transferring data will be
indicated on the right side of the screen.
•
“End Transfer” will be displayed once the transferring is complete.