![Utilimaster REACH Service Manual Download Page 78](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305078.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
78
Reach—Body Service Manual
E-mail:
Panels
Removal
NOTE: Before removing the bottom panel, the cables needs to be removed.
NOTE: Remove hardware from panels to be used on replacement panels.
1. Close door and clamp track below panel to be
removed.
2. Remove rivets in hinges. Insert a punch in one of
the rivet holes to stabilize the panel while removing
the remaining rivets.
NOTE: If removing the top panel, remove the bolts
and washers in both top rollers.
3. Remove rollers.
4. Lift the door panels, above panel to be replaced,
into horizontal track and secure with clamps on
the track.
5. Remove punches and lift out the panel.
CAUTION: Do NOT drill through the outside panel of a hollow core door.
Top roller bracket
Roller bracket