Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
61
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
B-Pillar Inner Flocked Seal Removal
NOTE: Replacing inner flocked seal requires replacement of both extrusion and seal.
1. Remove three M6 scrivets from trim panel above door.
2. Set trim panel aside.
3. Remove ten M6 bolts in B-pillar.
4. Remove two M8 bolts from rear catch assembly.
5. Set rear catch assembly aside.
6. Remove and discard B-pillar.
B-Pillar Inner Flocked Seal Installation
1. Secure rear catch assembly to B-pillar with two M8 bolts.
2.
Torque to 17–21 ft•lbs.
3. Secure B-pillar with ten M6 bolts.
4.
Torque to 7–8 ft•lbs.
5. Secure trim panel above door with three M6 scrivets.
Scrivet location
Rear catch assembly
B-pillar
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.