![Utilimaster REACH Service Manual Download Page 168](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305168.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
168
Reach—Body Service Manual
E-mail:
Linkage Assembly
Removal
1. Remove wiper arms.
2. Remove rubber caps from pivot arms.
3. Remove M20 nuts and washers from pivot arms. Keep for
reinstallation.
4. Remove four M6 bolts from wiper mount brackets.
5. Remove two bolts and nuts from brace mounting studs.
6. Move linkage assembly as far over to the passenger’s side,
then pull out through the driver’s side. Set linkage assembly
aside.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
M20 NUT
SPACER
WASHERS
CAP
M8 NUT
Pivot arm
Nut locations on brace mounting studs
Bolt location on wiper mount brackets