Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
40
Reach—Body Service Manual
E-mail:
Tray Panel
Removal
1. Remove four M6 screws from tray panel.
2. Remove panel and set aside.
Installation
1. Secure tray panel to dash with four M6
screws.
2.
Torque to 7–8 ft•lbs.
Washer Bottle Panel
Removal
1.
Remove fire extinguisher.
2. Remove fuse cover panel.
3.
Remove five #8 Phillips head screws and washers
from washer panel.
4. Remove one M6 screw from panel.
5. Remove panel and set aside.
Installation
1. Secure washer panel to dash with one M6 screw.
2.
Torque to 7–8 ft•lbs.
3.
Secure panel to dash with five washers #8 Phillips head screws.
4.
Torque to 23–27 in•lbs.
5. Install fuse cover panel.
6.
Install fire extinguisher.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
Tray panel
Washer bottle panel
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.