![Utilimaster REACH Service Manual Download Page 46](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305046.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
46
Reach—Body Service Manual
E-mail:
Adjustment
1. Loosen three M10 bolts in guide.
2. Adjust guide up to prevent the door from
rattling or down if the door is too tight.
3. Cycle door open and closed.
4. Adjust again if necessary.
5.
Torque bolts to 34–40 ft•lbs.
Removal
NOTE: In order to remove driver’s side door, the driver’s side mirror must be removed.
1. Remove guide.
2. Remove three M6 scrivets from trim panel above door.
3. Set trim panel aside.
Screw locations in guide
Scrivet location on trim panel
CAUTION: Use care when removing door to avoid damaging the paint.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.