![Utilimaster REACH Service Manual Download Page 36](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305036.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
36
Reach—Body Service Manual
E-mail:
Installation
1. Secure panel with M6 nut and screw in the center of dash valance panel.
2. Secure panel with eleven M6 screws.
3.
Torque to 15–25 in•lbs.
4. Secure convenience panel to dash with four #8 Phillips head screws.
5.
Torque to 23–27 in•lbs.
6. Secure air louver by holding the front of the louver and turning the
back clockwise.
7. Connect wiring harness to switches.
8. Connect wiring harness to heater controls.
9.
Connect wiring harness to 12V outlet.
10. Install radio.
11.
Secure dash vent by pushing in spring clip with a flat blade
screwdriver.
12. Install tray panel.
13. Install cluster panel.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
Screw locations
Dash vent
Air louver