![Utilimaster REACH Service Manual Download Page 157](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305157.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
157
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Mirrors
Adjustment
To receive maximum benefit from the outside mirrors, adjust the driver’s side mirror so you can see just
a small amount of the side of the vehicle. Have someone assist you by adjusting the passenger’s side
and driver’s side mirrors while sitting back in the driver’s seat. Some exterior mirrors are convex. A
convex mirror’s surface is curved to increase the visible area, but use these mirrors with care, especially
when changing lanes and backing up.
Removal
NOTE: On driver’s side, remove front quarter before removing mirror arm.
NOTE: On passenger’s side, remove A-pillar trim before removing mirror arm.
1. Remove four Phillips head screws from mirror access cap and set
cap aside.
2. Loosen four 3/16" hex head screws that hold the mirror head on to
the mirror arm.
3. Set mirror head aside.
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
WARNING: To prevent breakage and possible injury, do NOT push directly on the glass. Push on the
mirror frames only.
Mirror access cap screw location
WARNING: Objects seen in convex mirrors are closer than they may appear.