Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
116
Reach—Body Service Manual
E-mail:
Condenser
The condenser is located on the passenger side of the vehicle behind the bumper fascia.
Removal
1. Remove front fascia.
2. Drain the air-conditioning system of all refrigerant and disconnect air-conditioning hoses from
the condenser.
3.
Remove five M8 screws from the bracket and remove bracket from bumper.
4. Remove 14 blind rivets from condenser.
5. Remove condenser and set aside.
Installation
1. Secure condenser to bracket with 14 blind rivets.
2.
Secure bracket to bumper with five M8 screws.
3.
Torque to 17–21 ft•lbs.
4. Reconnect air-conditioning hoses.
5. Charge air-conditioning system with 1.2 lbs of refrigerant.
6. Start vehicle and check air-conditioning performance.
7. Install front fascia.
Condenser
CAUTION: Discard ALL used fasteners and replace with new. If using a fastener that does NOT have
preapplied thread lock, apply a medium-grade liquid thread lock.
WARNING: Utilimaster recommends that only a licensed/certified automotive technician services the
vehicle's air-conditioning system.