Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
118
Reach—Body Service Manual
E-mail:
Installation
1. Inspect connector pins for defects and replace if necessary.
2. Connect wire harness to control module.
3. Slide control module under lip of bracket.
4. Secure control module with two 8/32" nuts.
5. Turn ignition key to On position and check all functions of heat and air-conditioning system.
6. Install dash valance panel.
Dryer
Dryer Removal
NOTE: Keep all hardware for reinstallation.
NOTE: The expansion valve must be replaced when replacing the dryer.
1. Drain the air-conditioning system of all refrigerant.
2. Remove grille.
3. Remove grille screen.
4. Remove air intake from air cleaner assembly.
5. Disconnect air-conditioning hoses from dryer.
Nuts on control module
Air intake
WARNING: Utilimaster recommends that only a licensed/certified automotive technician services the
vehicle's air-conditioning system.