![Utilimaster REACH Service Manual Download Page 175](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305175.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
175
For Assistance Call: 800-237-7806
Parts On-line:
https://parts.utilimaster.com
Reach—Body Service Manual
Fax: 574-862-7637
Tape, Double-Faced Adhesive
Removal
Use a razor knife to cut along the length of the tape while pulling apart the joined flat surfaces. Scrape
off remnants as much as possible. Clean with a solvent.
Installation
Apply to one surface from a fresh roll. Do
NOT
remove the tape paper until the other surface is
properly positioned. Once the tape sticks to a surface, you will
not
be able to reposition it without
starting over.
Tape, Vinyl Barrier
White vinyl tape is used wherever steel and aluminum surfaces adjoin in order to prevent corrosion.
Removal
Peel or scrape off.
Installation
Use a fresh roll to adjoining surfaces.
NOTE: Vinyl tape rolls can be ordered with the following part numbers:
1"
[25.4 mm] wide roll........P/N 12303707
2"
[50.8 mm] wide roll........P/N 12303706
3"
[76.2 mm] wide roll........P/N 12303705
4"
[101.6 mm] wide roll......P/N 12605947
Thread Lock
Thread lock (threadlock or threadlocker) is a liquid sealant designed for the adhering and sealing
of threaded fasteners. It prevents fasteners becoming loose from shock and vibration and reduces
corrosion. Whenever thread lock is recommended, ALWAYS use the medium grade thread lock,
commonly called "blue," that allows disassembly with standard hand tools.
Removal
Bolts with thread adhesive cannot be reused. After bolt is removed, scrape off any seal residue
remaining on a reusable surface.
Installation
Slowly torque the new bolt to the appropriate value.
Refer to Loctite
®
Thread locker Blue 242
®
or equal product.
CAUTION: Do NOT use Loctite
®
thread locker on the
threads of a nutsert.
CAUTION: Using a power tool to spin the fastener quickly may lower the effectiveness of the seal.