Utax P-4030D, User Manual

Page: 117 / 312

4-57
Operation Panel
This new network address section (originally part of the host address) made possible by the subnet mask is referred to as
the subnet address.
1
In the
IPv4 Setting
menu, press  or  to select
Subnet Mask
.
2
Press [OK] . The
Subnet Mask
screen appears.
3
Use the numeric keys or press  or  to set the subnet mask.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing
 or  .
Use  and  to move the position being entered, which is shown
highlighted.
4
Press [OK] . The subnet mask setting is stored and the
IPv4
Setting
menu reappears.
Default Gateway (Gateway setting)
Gateway generally refers to a protocol conversion device used to allow networks with differing protocol systems to
interconnect.
For example, a "Gateway" device is required to connect a different closed network (using its own protocols) to the open
Internet (using TCP/IP).
By installing a gateway, the communications protocols and data display modes on different networks can be made
compatible.
On TCP/IP networks, the term gateway is used to refer to routers.
1
In the
IPv4 Setting
menu, press  or  to select
Default
Gateway
.
2
Press [OK] . The
Default Gateway
screen appears.
3
Use the numeric keys or press

or

to set the default gateway.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing

or

.
Use

and

to move the position being entered, which is shown
highlighted.
4
Press [OK] . The default gateway is stored and the
IPv4 Setting
menu reappears.
Note
When you enter the subnet mask, be sure to set the
DHCP
setting to
Off
.
Subnet Mask:
a b
/255. 255. 0. 0
Note
Before you enter the gateway, be sure to set the
DHCP
setting to
Off
.
Default Gateway: a b
/**0.
0. 0. 0