56K Softmodem
Command Reference
- 90
Base Unit: 10 min.
S36—LAPM Failure Control
•
Default: 7 (00000111b).
S37—Dial Line Rate*
This register sets the maximum line data rate. In V.90 mode, S37 controls the
upstream V.34 rate.
Range: 0—19.
Default: 0.
* The register default shown here is for North America.
Bit Description
Value
0—2
Action upon LAPM failure. If S48 = 128,
the fallback options are initiated immedi-
ately after establishing the data connec-
tion. If an invalid number is entered, the
number is accepted into the register, but
S36 will act as if the default value has
been entered.
Note:
For performance
reasons, an error-corrected link is not
supported in V.23 (1200/75 bits/s) or any
300 bits/s mode.
0 = The 56K Softmodem disconnects.
1 = The 56K Softmodem stays on-line and a normal
mode connection is established.
2 = Reserved.
3 = The 56K Softmodem stays on-line and a normal
mode connection is established.
4 = A MNP connection is attempted and if it fails, the
56K Softmodem disconnects.
5 = A MNP connection is attempted and if it fails, a
normal mode connection is established.
6 = Reserved.
7 = A MNP connection is attempted and if it fails, a
normal mode connection is established (default).
4—7 Reserved.
—