56K Softmodem
Command Reference
- 42
Table 3-73: +EFRAM Extended Syntax Commands
+ER=<value>—Error Control Reporting
Use this command to turn on or turn off the error control report. If the compression
report is enabled, the
+ER:<type>
intermediate result code reports the current
DCE-DCE error control type. It is issued after the determination of the error
control protocol and before the final result code (e.g.,
CONNECT
). Specifically,
the
+ER
intermediate result code is issued after the modulation report (
+MCR
and
+MRR
) and before the data compression report (
+DR
).
Result codes:
OK
if <value> = 0, 1.
ERROR
if <value> does not equal 0, 1.
Command Description
+EFRAM=<value 1>,<value 2>
Sets the link-layer frame fields size.
+EFRAM?
Displays the current maximum link-layer frame field size settings.
+EFRAM=?
Displays the supported maximum frame sizes.
