56K Softmodem
Command Reference
- 25
B1 L2 M1 E1 N1 Q0 V1 W2 X1 Y0 &C1 &D2 &G0 &J0 &K3 &L0 &Q5 &S0 %C3 %E2
\J
0
S00:002 S01:000 S02:043 S03:013 S04:010 S05:008 S06:003 S07:060 S08:00
2
S09:050 S10:014 S11:095 S12:050 S14:138 S18:000 S20:000 S21:048 S22:02
2
S23:008 S27:073 S28:160 S29:050 S30:000 S31:010 S32:010 S33:000 S35:00
0
S36:007 S37:000 S38:002 S39:003 S40:040 S41:107 S42:001 S43:001 S48:00
7
S49:027 S50:015 S51:095 S52:007 S53:047 S54:002 S55:035 S56:000 S57:00
0
S58:030 S60:255 S61:000 S62:000 S63:030 S70:000 S83:005 S90:000 S91:01
0
S92:010 S93:006 S94:000 S95:12
9
TELEPHONE NUMBERS:
0 = 5557107
1 = 5557106
2 =
3 =
OK
&W<value>—Store Current Configuration
Use this command to store the modems command options and all S registers
except S3, S4, and S5. The
Z<value>
command or a powerup reset, of the
modem, restores this profiles.
Result codes:
OK
if <value> = 0, 1.
ERROR
if <value> does not equal 0, 1.
Table 3-32: &W<value> Commands
&Y<value>—Select Stored Profile for Hard Reset
This command does not change the behavior of the modem but is included for
compatibility with applications that issue the
&Y
command.
Result codes:
OK
if <value> = 0, 1.
ERROR
if <value> does not equal 0, 1.
&Z<storage location>=<dialing sting>—Store Telephone Number
Use this command to store a dialing string. The 56K Softmodem can save four
Command Function
&W0
Stores the current configuration as profile 0.
&W1
Stores the current configuration as profile 1.