56K Softmodem
Command Reference
- 59
Result codes:
OK
if <value> = 0, 1.
ERROR
if <value> does not equal 0, 1.
Table 3-115: Valid +PIG Commands
Table 3-116: +PIG Extended Syntax Commands
+PMH=<value>—Modem On Hold Enable
Use this command to enable or disable modem on hold. Note, that the
+PMH
command does not effect the parameters of the
+PMHT
(see “+PMHT=<value>—
Modem On Hold Timer” on page 59) command. The
+PMH
command only
enables or disables modem on hold. The
+PMHT
command configures the
modem to deny a modem on hold request or grant a modem on hold request with
the selected hold time.
Result codes:
OK
if <value> = 0, 1
ERROR
if <value> does not equal 0, 1
Command Meaning
+PIG=0 Enable
PCM
upstream.
+PIG=1 Disable
PCM
upstream (default).
Value Meaning
+PIG=<value>
Enable or disable PCM upstream.
+PIG?
Display the current state of the
+PIG
command.
+PIG=? Display
the
supported
+PIG
parameter values.