56K Softmodem
Command Reference
- 32
Result codes:
OK
if <value> = 0, 1.
ERROR
if <value> does not equal 0, 1.
Table 3-46:
-C<value> Commands
-V90=<rate>—Enable/Disable V.90 Settings
Result codes:
OK
if <rate> = 0—23.
ERROR
if <rate> does not equal 0—23.
Table 3-47: -V90 Commands
Command Function
-C0 Disabled
(default).
-C1 Enabled.
Command Function
-V90=<rate> Controls
the
downstream rate. See Table 3-48: -V90=<rate> Equivalent Down-
stream Rates for the possible values of <rate>.
-V90=0 Disables
V.90.
-V90=1
Enables V.90 auto rate (default).
-V90?
Displays the current value.
-V90=?
Shows the range of <rate>.
