56K Softmodem
Command Reference
- 48
Table 3-88: +GCAP Responses
Note:
* ITU-T recommendation V.250 (05/99) identifies an additional response (+MV18S) that is not
included with the 56K Softmodem. +MV18S is for V.18 modulation control. For more information refer
to ITU-T recommendation V.250 (05/99).
+GCI=<T.35_country_code>—Country of Installation
Use this command to set the modem country code. ITU-T Recommendation T.35
defines the country codes and the country names. Table 158 on page 82 has a
complete list of the T.35 country codes.
Result codes:
OK
if <T.35_country_code> = valid country code as defined by Table 158.
ERROR
if <T.35_country_code> does not equal valid country code as defined by
Table 158.
Table 3-89: +GCI Extended Syntax Commands
+GMI—Manufacturer Identification
+GMI is an extended syntax command. It returns the modem manufacturer
and either the OK or ERROR result code. The +GMI=? syntax returns an
ERROR result code. The other two forms return an OK result code.
Result codes:
OK
when using the
+GMI
or
+GMI?
syntax.
ERROR
when using the
+GMI=?
syntax.
+GCAP Responses*
DCE Control Standard
Description
+FCLASS T.class
1,
+F
Class 1 FAX DCE control
+MS
+M commands
Modulation control: • +MS • +MR
+ES
+E commands
Error control: • +ES • +EB • +ER •
+EFCS • +ETBM
+DS
+D commands
Data compression • +DS • +DR
Command Description
+GCI=<T.35_country_code>
Set the country code.
+GCI?
Display the current country code setting.
+GCI=?
Display all supported country code settings.