56K Softmodem
Command Reference
- 44
Table 3-77: +ES Combinations
Table 3-78: +ES Extended Syntax Commands
+ESR=<value>—Selective Repeat
Use this command to enable or disable the selective reject mode*. Result codes:
OK
if <value> = 0, 1.
ERROR
if <value> does not equal 0, 1.
Combination Mode
+ES=1,0,1 Buffered
mode.
+ES=0,1,0 Direct
mode.
+ES=4,4,6
MNP
or disconnect mode.
+ES=3,3,5
LAPM or disconnect mode.
+ES=4,0,6
MNP
or buffered mode.
+ES=3,0,2 LAPM,
MNP
, or buffered mode (default).
+ES=2,0,2
LAPM or buffered mode.
+ES=3,2,4 LAPM,
MNP
, or disconnect mode.
+ES=,,8
V.42 sync buffer mode (V.80 enabled).
+ES=6,,8
V.42 sync buffer mode (V.80 enabled).
Command Description
+ES=<value>
Selects the modem error control method.
+ES?
Displays the current error control settings.
+ES=?
Displays the supported error control settings.