Unipulse TM700, Operation Manual

Page: 42 / 91

33
5 SETTING OF FUNCTIONS
33
SE
TT
IN
G
O
F
FU
N
C
TI
O
N
S
Chapter
5
■
Near zero
This function is to detect that the torque is near zero.
Near zero ON: |Torque|
≦
Setting value of near zero
Near zero OFFF: |Torque|
＞
Setting value of near zero
≪
Setting value
≫
00000 to 99999
How to set
■
Comparison timing
Set the operating condition of HI/LO limit comparison(torque).
Select the conditions from the following.
ALL: HI/LO limit comparison is always performed.
NZ OFF: HI-LO limit comparison is performed when the indicated value is not near zero.
Set the near zero parameters by the near zero operation.
HOLD: HI-LO limit comparison is performed when the indicated value is held.
Set the operating conditions of HI/LO limit comparison (Rotation speed).
Select the conditions from the following.
ALL: HI/LO limit comparison is always performed.
Torq. Sync. (Torque synchronized):
HI/LO limit comparison is performed at the same timing as that of the torque
comparison timing.
How to set
Near zero ON/OFF is closely related to the comparison timing.
For details, see "Comparison timing" on page 33.
Point
SET. Comp. Setting Page 2
→ →
Meas. Setting
→
SET. Comp. Setting Page 2/Page 4
→ →
Meas. Setting
→