WARNING
II
WARNING
II
WARNING
●
For the entire system to function safely when the TM700 becomes faulty or malfunctions,
provide a safety circuit outside the TM700.
●
Before using the TM700 as described below, make sure to consult with our sales personnel.
- Use in environments not described in the operation manual.
- Use greatly impacting human lives and assets, such as medical devices, transport devices
entertainment devices, and safety devices.
●
Do not modify the TM700. Doing so may cause fire or electric shocks.
●
Do not install in the following environments.
- Places containing corrosive gas or flammable gas.
- Where the product may be splashed with water, oil or chemicals.
●
Do not connect a commercial power source directly to the signal input/output terminals.
●
Be sure to ground the protective ground terminal.
●
The attached AC cable is designed for domestic use in Japan, and its rating is 125V AC, 7A.
For use at voltages exceeding the rating and for overseas use, have a separate AC cable
prepared.
●
Before performing the following, make sure that no power is applied.
- Attachment/detachment of connectors of options, etc.
- Wiring/connection of cables to the terminal blocks.
- Connection of the earth cable.
●
For connection to the signal input/output terminals, check the signal names and pin
assignment numbers, and then carry out wiring properly.
●
Be sure to use crimp contacts for connection to the terminal blocks, and do not to connect
bare wires as they are.
●
Be sure to install the attached terminal block cover after wiring to the power input terminals.
Otherwise, electric shocks may result.
●
Before applying power, carefully check the wiring, etc.
●
Use at a proper power supply voltage.
●
Do not damage the power cord. Doing so may cause fire or electric shocks.
●
Do not touch any terminal while applying power. Doing so may cause electric shocks or
malfunctions.
●
If the cover of the main body is opened, it may cause an electric shock internally. Even if the
power is off, the internal capacitor is charged. Contact us for internal inspection or repair.
●
In the case of smoke, an abnormal smell or strange sound, immediately turn off the power,
and disconnect the power cable.
●
As for the batteries used in TM700, do not at any time dismantle the batteries, change the
batteries shape by subjecting it to pressure or throw the batteries into fires as these may
cause the batteries to explode, catch fire or leak.
This sign forewarns the presence of hazards
that could result in serious injury or fatality
when incorrectly handled.
Warning on design
Warning on installation
Warning on wiring
Warning during startup and maintenance
Summary of Contents for TM700
Page 1: ...20MAY2021REV 1 08 TORQUE MONITOR TM700 OPERATION MANUAL ...
Page 91: ......