Unipulse F805AT-BC, Operation Manual

Page: 200 / 202

18.STATEMENT OF CONFORMATION TO EC DIRECTIVES (Designated when it is shipped)
185
18. STATEMENT OF CONFORMATION TO EC DIRECTIVES
(Designated when it is shipped)
* The following notice must be observed only CE marking.
Unipulse F805AT-BC Belt Scale Controller conforms to The EC Directives (based on
Council of the European Communities), and is allowed to affix CE mark on it.
- Low Voltage Directive EN61010-1:2010
EN62311:2008 (test distance: 0cm)
- EMC Directive EN61326-1:2006
EN55011:2009, A1:2010 Group1, ClassA
EN61000-3-2:2006, A1:2009, A2:2009
EN61000-3-3:2008
EN61000-4-2:2009
EN61000-4-3:2006, A1:2008, A2:2010
EN61000-4-4:2004, A1:2010
EN61000-4-5:2006
EN61000-4-6:2009
EN61000-4-8:2010
EN61000-4-11:2004
The following notice must be observed when you install F805AT-BC unit.
1. Since F805AT-BC is defined as an open type (unit to be fixed or built-in), it must be
fixed or bolted to frame or solid board securely.
2.
The power cable attached to this product as standard equipment can be used in the AC100V
power supply in Japan. (Official ratings voltage AC125V)
Please use the power cable authorized in the country when you use this product outside
Japan.
3. Use shielded cable for connection with components other than power supply, such as
load cell, input/output signals and optional device.
4. Attach separate type ferrite core (supplied as standard item with the unit) on terminal
box side of power supply cable and also on connecting cable to sensor.
（ ）
Overvoltage category II
Pollution degree 2
Notice
Lightning surge protector is not included in standard supply for F805AT-BC.
The combination of the main unit of the F805AT-BC and a lightning surge
protector conforms to EN61000-4-5 (lightning surge immunity) in the EMC
Directives.
Please refer to "Connection of Lightning serge protector" on P.186 for information
regarding lightning surge protector connection.