Unipulse F805AT-BC, Operation Manual

Page: 29 / 202

3.SCREEN LAYOUTS AND SETTINGS
14
3-3-3. Graph screen
Arithmetic values selected from belt speed, weight density, feed rate, load ratio, feed
ratio, and control rate are displayed either in bar graph or analog waveform. One of the
two graph formats is arbitrary chosen by pressing
. Note that control
rate can only be displayed in waveform.
GRAPH TYPE
Goes to
MODE
select screen
This button defines the bar graph end point
(pressing this button select waveform)
Graph select key
End point setting key
Bar graph Bar graph end point
Bar graph area
【
Bar graph
】
【 Waveform 】
(pressing this button select comparison screen)
Display select key
Moves cursor
Calculated value
Y end point
Goes to
Name of the
MODE
Area for
Ch1 graph
STARTs graph display
(the label changes to STOP
Area for
Ch3 graph
Area for
Ch2 graph
Cursor ON/OFF
Goes to
comparison screen
(effective only if cursor ON)
Elapsed time
(pressing this button select bar graph)
Graph select key
select screen
while the graph is being drawn)
calculated value