IV
About the power cable
CAUTION
●
Tighten the screws for the signal input/output terminals at the specified torque.
If they are loose, shorts, fire or malfunctions may occur.
Tightening torque: 0.5N•m (at the DC spec.)
●
For sensors, external inputs/outputs and options, use shielded cables.
●
The temporary overvoltage applied to the power should not exceed 1500V.
●
For turning on/off the power, be sure to keep intervals of 5 seconds or more.
●
After power-on, make sure to warm up the F805AT-BC for at least 30 minutes or more before
use.
●
If the F805AT-BC is not used by the specified method, its protective performance may be
impaired.
●
Maintenance
- When performing maintenance, disconnect the power.
- Do not wipe with a wet rag, or with benzine, thinner, alcohol, etc. Doing so may cause
discoloration or deformation of the F805AT-BC. In the case of heavy contamination,
wipe off the contamination with a cloth after dipping it into a diluted neutral detergent
and wringing it well, and then wipe with a soft, dry cloth.
●
When the F805AT-BC is shipped, spacers made of corrugated cardboard are used as
cushioning materials.
Though it is factory-designed so that shocks can sufficiently be absorbed, breakage may
result if shocks are applied when the spacers are reused for transportation. If you send the
F805AT-BC to us for repair, etc., take adequate measures against shocks by using
polyurethane materials, etc., separately.
●
If you dispose of the product, handle it as industrial waste.
This sign forewarns the presence of hazards
that could result in personnel injury or property
damage when incorrectly handled.
Caution on wiring
Caution during startup and maintenance
Caution during transportation
Caution during disposal
CAUTION
●
The power cable attached is an object for checking of operations.
Please use the power cable authorized in the country for employment.
This sign forewarns the presence of hazards
that could result in personnel injury or property
damage when incorrectly handled.
Summary of Contents for F805AT-BC
Page 1: ...F805AT BC BELT SCALE CONTROLLER 15 Feb 2019 Rev 1 03 OPERATION MANUAL...
Page 15: ...CONTENTS XIV M E M O...
Page 202: ......
