Unipro UniGo 5005, User Manual

Page: 40 / 56

40
If you set the RPM shift point at 12000 RPM,
and the RPM delta value to 200 RPM, the first
LED will turn on at 11600 RPM. Then 11800
RPM, 12000 RPM etc.
Please see “RPM SHIFT” on page 30 and
“RPM DELTA” on page 30 for more informa-
tion.
Yellow LED means optimal gear shift point.
Shift light when all LEDs are flashing.
If “RPM SHIFT TYPE” on page 30 is set to
“All LEDs“, all five LEDs will flash rapidly when
the RPM shift point is exceeded. The RPM
delta value will not be used.
WARNING. Do not look directly into the
LEDs when they are set to high bright-
ness. They are very bright!
LOW BATTERY
When the battery voltage get too low, a
warning icon will be show in the headline and
in the help text. The icon in the headline is
showing how close to empty the battery is. To
see more about the warning levels, please look
at “BATTERY EMPTY” on page 34.
Low battery warning in headline and in the
help text.
MAIN MENU
The regular tire pressure gauge simply shows
the current tire pressure and continuously
updates when air is released by pressing one
or both of the valves on the pressure handle.
Main menu with icons for all functions.
Keep pressing the right button (
3
) at startup
to go directly to Pressure mode.
RUN MODE
UniGo logs data into sessions. Each
session contains all the information about the
race and each time the engine is started, a
new session is made.
A session can be automatically deleted. That
happens if the sessions is less than 2 minutes
long. This is to prevent a lot of sessions being
generated if the go-kart is warmed up on the
pit trolley.
RUN MODE 1
This run mode is used to show the maximum
number of data channels. The lap time and
Operating UniGo
R e f e r e n c e
G u i d e