Unipro UniGo 5005, User Manual

Page: 19 / 56

19
Q u i c k G u i d e
SIX BUTTONS
For easy operation we made six buttons on
UniGo. They are clearly marked with a small
icon, but here is the basic description of each
button.
The up button is used to move up in menus
and for increasing values.
The down button is used to move down in
menus and for decreasing values.
The ok button is used to go to the next
menu, open up a setting for changing and for
accepting the changes made.
The menu button is used to go to the main
menu and to bring up the pop-up menu.
The back button is used to go back to the
previous menu and to cancel any changes
made.
The mode button is used to change be-
tween different modes. That could be different
run mode screens, analyze screens etc.
2 WAYS TO PRESS BUTTONS
To use UniGo, you need to know how to press
the buttons in 2 different ways:
1. A short press -
2. A long press - 1 1 1 1 1 1
For the general use of UniGo, it is only neces-
sary to use the short press.
When changing values, it is possible to keep
pressing a button to speed up the change.
After a short while, the key will start to repeat
and after a little while more, it will start to
accelerate in the change.
TURNING UNIGO ON
There are 2 different ways to turn UniGo on:
1. Press the mode button ( ) shortly to start
the Laptimer manually.
2. Start the engine and UniGo will start when
it detects the RPM signal.
UniGo starts by showing the startup screen
including information about firmware version
number, battery voltage, memory used and
the environment temperature. It will also show
the temperature sensors connected and what
type they are.
The startup screen will show an animated
Unipro logo and the owners name. If no
owner name is programmed, it will show the
Laptimer’s serial number.
All this information can also be found in the
Info menu.
Read the Quick Guide and learn how to use the basic functions
of the UniGo:
Turn UniGo on and off, start logging data, analyze them on
UnGo and transfer them to a computer with the optional USB
cable.
You will be ready to go in 5 minutes...
Quick Guide
19