Unipro UniGo 5005, User Manual

Page: 23 / 56

23
menu and insert the optional USB cable in the
top connector.
The USB cable from 6002/6003/7002/7003
is NOT compatible with UniGo. Using
the wrong cable might damage your PC !
USB mode when connected to a computer.
When the cable is attached, UniGo cannot be
operated because the computer use the Flash
drive. The Off Camber Data program can then
transfer the data files.
Like any other Flash drive you need to
eject the drive safely before removing
the cable from the computer.
TRANSFER TO A UNIPRO
USB FLASH KEY
5005
It is very easy to transfer data to the Off Cam-
ber Data program using the optinal Unipro
flash key. Just go to the main menu and insert
the flash key in the top connector as shown on
the next picture.
Unipro USB flash key mounted in the USB
connector.
When the flash key is inserted, the usb menu
will appear.
USB menu when flash key is inserted.
5005
Simple press “COPY NEW SESSIONS” and all
new sessions will copied to the USB flash key.
Depending on the “AUTOCLEAR AFTER TRANS-
FER” on page 34 the sessions will automati-
cally be deleted after the transfer.
When the sessions are transferred, you can
disconnect the flash key and connect it to your
computer using the small USB cable supplied.
You can transfer the new sessions several
times. This is useful if more people in a team
need the data for analysis. Only when a new
session is started, the latest copied sessions
are marked as old.
That’s how easy it is! If you are ready for
some more advanced features, then read the
Reference Guide later in this manual.
Also check www.uniprolaptimer.com for
news and updates.
Q u i c k G u i d e
Quick guide