Unipro UniGo 5005, User Manual

Page: 21 / 56

21
Q u i c k G u i d e
Quick guide
Screensaver with the countdown timer acti-
vated including time and date.
5005
When the timer reach zero an alarm icon is
shown in the display and the yellow LED is
flashing.
Screensaver after count down to zero. The
yellow LED will be flashing.
3005
You can use this countdown timer to make
sure you are in time for the next race. Just
remember that the automatic power off might
turn UniGo off, before the countdown timer
reaches zero! To adjust the power off time see
“AUTO POWER OFF TIME” on page 33.
If you want to stop the countdown timer,
use the down button ( ) to adjust it to
zero.
TURNING UNIGO OFF
There are a lot of different ways to turn UniGo
off.
Press and hold it down to turn UniGo off.
When you see “POWER OFF” in the display,
you can release the button again.
Power off screen when holding down the
mode (
1
).
UniGo will also turn itself off if no button
is pressed and no RPM, speed or trigger is
detected after a preselected time. Please see
“AUTO POWER OFF TIME” on page 33.
You can also turn it off from the main menu by
pressing the
icon. Or finally you can press
the menu button ( ) to bring up the popup
menu like shown here and select “POWER
OFF”.
Power UniGo off from the popup menu.
It is important not to turn UniGo off by remov-
ing the power. Important information might be
stored when UniGo powers down. Worst case,
the file system might be affected like your
computer if you just remove the power.
BUILT-IN HELP
When you move around in menus, UniGo will
display one line of help text at the bottom of
the display. Use this line to get familiar with
the different settings in UniGo.