Unipro UniGo 5005, User Manual

Page: 42 / 56

42
is updated every time the start/finish line is
passed.
ANALYSE MODE
The analyse menu contains everything
needed to analyse the data directly on UniGo.
Analyzing data will always be faster and better
using a computer though!
Analyse menu for looking at sessions, lap/
split times, min/max values and counters.
Use the up ( ) and down ( ) buttons to
move around in the menu and press ok button
( ) on the icon to go to that menu.
SESSION SELECT
UniGo logs data into sessions. Each
session contains all the information about the
race and each time the engine is started, a
new session is made.
List of sessions. Select the one you want.
Use the up ( ) and down ( ) buttons to
move around in the list and press ok button
( ) to select the session.
TIME ANALYSIS
Several screens can be used to analyse
the timing of the race. These screen are listed
in the following section. To change between
the different screen, simply press the
mode
button ( ) until you get to the screen you
want. Press the
back button ( ) to go back to
the analyse menu again.
Different people have different prefrerences.
Therefore the time analysis screen is remem-
bered so it will start on the same screen each
time.
OVERVIEW
When starting analysing a new session, the
overview screen is a good place to start. This
screen will show the three best laps including
the minimum and maximum of three data
channels. It also provides information about
the theoretical best lap time, number of laps
and the average RPM for the whole session.
On a UniGo 5005, the starting time and date
is also shown.
Overview screen with the most important
information for the 3 best laps. 5005 ver-
sion shown.
Use the mode button ( ) to change to the
next analyze screen.
LAP AND SPLIT TIMES
The lap and split times screen will provide all
the details about the lap and split times includ-
ing the theoretical best lap time and the best
running lap time.
Operating UniGo
R e f e r e n c e
G u i d e