Unify OpenScape 4000 User Manual Download Page 58

Page: 58 / 256

Operating your OpenScape Desk Phone CP700/700X

Switching to a different menu during a call

You can use the

key while on a call to switch to the Conversations menu.

Use the

key to open the main menu and from there, for example, change the Brightness of

the display in the Settings. If you want to activate Do not disturb quickly, you can use the

key

to switch temporarily to the Presence menu and then return.

Icons in call states

Icon

Meaning

‹

The phone is ringing or dialing.

A call is active.

You have placed the call on hold (e.g. consultation hold).

–

Your call partner has placed the call on hold.

The voice connection is secure.

The voice connection is not secure.

Indicates an
active call

Returning to the
call view

Status icon for
calls

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands